Alpine PDX

goodlogo


	Home >>> Amplifiers >>> Alpine PDX >>>


	Alpine PDX Amplifiers


	Tru Technology Alpine PDX Alpine V-Power Kenwood Tube Driver

LOOK FOR THIS SIGN1

pdx-4


	Good things come in small, stackable packages. Who knew something so small could pump so much power? The Alpine PDX series amplifiers are for the true car audio enthusiast – for those who want the best power, sound quality, and efficiency, all from a compact size. Get the most out of your system with Digital PDX.




		PDX-1.1000 Mono Power Density Digital Amplifier

	FEATURES General • Gain Control: Adjustable • Board Design: 4-Layer Glass Epoxy PC Board • Final Outputs: MOSFET • Pre-Amp Stage: Discrete • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals • Crossover: Adjustable Low-Pass • RCA Output: Non-Fading Pre-Amp Output • Power Indicator: Top Mounted Blue LED Power/Status Indicator • Current Protection: Auto Over-Current Protection • Board Circuitry: STAR Ciruit • Power Supply Design: DC-DC PWM Power Supply • Power Supply: Resonant Mode Power Supply • Thermal Control: Thermal Management Control • Channel Design: 1 Channel (Mono) • Amplifier Type: Class-D (Digital) Install • Mounting Design: Easy Stacking • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals • Terminal Layout: One-Sided • Connectors: Quick Disconnect Terminals SPECIFICATIONS General • Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4Ω) 80 dBA • Speaker Impedance: 4 or 2 Ω • Frequency Response: 20Hz - 200Hz (20Hz/-3dB) • Input Sensitivity: 0.1V to 8.0V (For Rated Power) • Power Requirements: 14.4V DC (11V to 16V) Dimensions • Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2-7/16'' • Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm Sound Tuning • Crossover: Variable, 50Hz - 200Hz (-24dB / oct), Low-Pass RMS Power Ratings • Per channel into 2 Ohms: (@14.4V ≤1%THD+N, 20Hz - 200Hz) 1000W x 1 • Per channel into 4 Ohms: (@14.4V ≤1%THD+N, 20Hz - 200Hz) 1000W x 1 CEA-2006 Power Ratings • CEA-2006 Power Rating: (4/2 Ω @14.4V ≤1%THD+N), S/N 80dBA, ref:1W into 4 Ω) 1000W x 1




		PDX-4.150 4/3/2 Channel Power Density Digital Amplifier

	FEATURES • Class-D • 4/3/2 Channel Operation • Stackable Installation Design • Thermal Management Processor • Adjustable Crossover (HP/LP) • MOSFET Power Supply • DC-DC PWM Power Supply • MOSFET Final Outputs • STAR Circuitry • Auto Over-Current Protection • Top Mounted Blue LED Power/Status Indicator • Integrated Wire and Mounting Screw Terminals • Input Channel Selector • Input Mode Selector Switch • One Side Terminal Layout • Gold Plated RCA Input Connectors • Continuously Adjustable Gain Control • Gold Plated Power Screw Terminals • 4-Layer Glass Epoxy PC Board • Speaker Quick Connect SPECIFICATIONS CEA-2006 Power Rating (40hm@14.4V = 1%THD+N), S/N 78dBA (Ref. 1W into 4Ohm): • 150W x 4 RMS Power (at 14.4V THD+N,20Hz-20kHz) • Per channel into 2 ohms : 150W x 4 (<=1%THD+N) • Per channel into 4 ohms : 150W x 4 (<=1%THD+N) • Brigded 4 ohms: 300W x 2 (<=1% THD+N) Dimensions • Heat Sink (WxHxD) in: 10-1/8" x 7-9/16" x 2-7/16" • Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm Bass Engine® Sound Tuning • Crossover Frequency : 1/2Ch + 3/4Ch, 30Hz-400Hz HP/LP/Off (-12dB/oct) General • Frequency Response: 20Hz - 20kHz (+0,-1dB) • Signal to Noise (S/N): 100dBA (Reference to Rated Power) • Input Sensitivity (For Rated Power): 0.2V to 4.0V (1.0 at Center Detent) • Input Impedance: 10k Ohm • Power Requirements: 14.4V DC (11V to 16V) • Weight: 3.11 Kg.




		PDX-1.600 Mono Power Density Digital Amplifier

	FEATURES General • Gain Control: Adjustable • Board Design: 4-Layer Glass Epoxy PC Board • Final Outputs: MOSFET • Pre-Amp Stage: Discrete • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals • Crossover: Adjustable Low-Pass • RCA Output: Non-Fading Pre-Amp Output • Power Indicator: Top Mounted Blue LED Power/Status Indicator • Current Protection: Auto Over-Current Protection • Board Circuitry: STAR Circuit • Power Supply Design: DC-DC PWM Power Supply • Power Supply: Resonant Mode Power Supply • Thermal Control: Thermal Management Control • Channel Design: 1 Channel (Mono) • Amplifier Type: Class-D (Digital) Install • Mounting Design: Easy Stacking • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals • Terminal Layout: One-Sided • Connectors: Quick Disconnect Terminals SPECIFICATIONS General • Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4Ω) 80 dBA • Speaker Impedance: 4 or 2 Ω • Frequency Response: 20Hz - 200Hz (20Hz/-3dB) • Input Sensitivity: 0.1V to 8.0V (For Rated Power) • Power Requirements: 14.4V DC (11V to 16V) Dimensions • Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2-7/16'' • Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm Sound Tuning • Crossover: Variable, 50Hz - 200Hz (-24dB / oct), Low-Pass RMS Power Ratings • Per channel into 2 Ohms: (@ 14.4V ≤1%THD+N, 20Hz - 200Hz) 600W x 1 • Per channel into 4 Ohms: (@ 14.4V ≤1%THD+N, 20Hz - 200Hz) 600W x 1 CEA-2006 Power Ratings • CEA-2006 Power Rating: (4/2 Ω @14.4V ≤1% THD+N), S/N: 80dBA, ref:1W into 4 Ω) 600W x 1




			PDX-4.100 4/3/2 Channel Power Density Digital Amplifier

	FEATURES General • Gain Control: Adjustable • Board Design: 4-Layer Glass Epoxy PC Board • Final Outputs: Fast Switching, Low Impedance Direct Fets • Pre-Amp Stage: Discrete • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals • Crossover: Adjustable High Pass, Low Pass • RCA Output: Non-Fading Pre-Amp Output • Power Indicator: Top Mounted Blue LED Power/Status Indicator • Current Protection: Auto Over-Current Protection • Board Circuitry: STAR Ciruit • Power Supply Design: DC-DC PWM Power Supply • Power Supply: Fast Switching, Low Impedance Direct Fets • Thermal Control: Thermal Management Control • Channel Design: 4/3/2 Channel • Amplifier Type: Class-D (Switch Mode Digital) Install • Mounting Design: Easy Stacking • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals • Terminal Layout: One-Sided • Connectors: Quick Disconnect Terminals SPECIFICATIONS General • Signal to Noise: CEA 2006 S/N Ratio (IHF A Weighted, Reference: 1W into 4Ω) 76 dBA • Speaker Impedance: 4 or 2 Ω • Frequency Response: 20Hz - 20kHz (+0, -1dB) • Input Sensitivity: 0.2V to 4.0V (For Rated Power) • Power Requirements: 14.4V DC (11V to 16V) Dimensions • Heat Sink (WxHxD) in: 10-1/8'' x 7-9/16'' x 2-7/16'' • Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm Sound Tuning • Crossover: Variable, 30-400Hz (-12dB / oct ), Low-Pass/High-Pass /OFF Selectable RMS Power Ratings • Bridged 4 Ohms: Bridged into 4Ω (≤1%THD+N) 200w x 2 • Per channel into 2 Ohms: (@14.4V ≤1%THD+N, 20Hz - 20kHz) 100W x 4 • Per channel into 4 Ohms: (@14.4V ≤1%THD+N, 20Hz - 20kHz) 100W x 4 CEA-2006 Power Ratings • CEA-2006 Power Rating: (4/2 Ω@14.4V ≤1%THD+N), S/N 76dBA (Ref. 1W into 4 Ω): 100w x 4


	HOME - In-Dash MP3/DVD/CD - Speakers - Subwoofers - Amplifiers - Video / Navigation - Alarms, Tracking, Telematics - Radar Detectors - Monitors - Tinting - Custom Installations - Locations - Contact Us







	Alpine EX-10 Alpine CDA-9883 Alpine CDA-9885 Alpine CDA-9965 Alpine IDA-X100 Check Availibility Ask a Question